Your Online Learning Hub
Joint Industry Projects Archive
Explore the latest proposals for Joint Industry Projects that aim to advance floating energy technologies. From inspection frameworks to digital twin models
49 Archived JIP Projects
Over 3000+ Satisfied customers
Our archived JIP’s
CrackGuard
Precompetitive R&D of affordable system for monitoring detected and allowable fatigue cracks in ship and offshore structures
Further info: Leaflet
Contact: Olivier Baas
4D-Fatigue
Assessment of multiaxial fatigue in welded joints under non-proportional, variable amplitude loading
Further info: Website
Contact: Paula van Lieshout
ComMotion
Computational methods for moving and deforming objects in extreme waves
Further info: Leaflet
Contact: Joop Helder or Tim Bunnik
SCReen
Increasing the fatigue resistance confidence for Steel Catenary Risers, by mean of adequate fatigue testing and modelling
Further info: project folder will follow
Contact: Jie Wu
TOWIN JIP
The objective of the TOWIN JIP is reduce the cost of the towing operation of floating offshore wind turbines (FOWT) by safely increasing the towing speed and expanding the operational criteria.
Further info: xxx
Contact: Saloni Palkar
MCA-Mooring Components II
Address the structural integrity of mooring components through an Engineering Critical Assessment methodology
Further info: Brochure
Contact: Jean Pierre Sauvage
SMART
Screening Methods for Analysis of extreme events
Further info: Leaflet
Contact: Tim Bunnik, Sebastien Fouqes, Carl Trygve Stansberg or Jule Scharnke
MCA Phase III
ECA Qualifications of R5 & Higher Grade Chains (“R5+”)
Contact: Jean Pierre Sauvage or Jean-Michel Aubert
SLADE
Contact: Øyvind Hellan
MCA Mooring Comp. III
Contact: Jean Pierre Sauvage
BreaKin
Wave impact loading on offshore structures due to BREAKing waves and their KINematics
Further info: Leaflet
Contact: Jule Scharnke
SquallMoor
Design Methodology and guidelines for moorings in squall conditions (Bureau Veritas and DNV GL)
Further info: Brochure
Contact: Siril Okkenhaug
OffRisk
Risk reduction within offloading operations by assessing human factors
Further info: OffRisk JIP
Contact: Karen van Vliet
NON LINEAR ROLL
Estimation and consideration of roll motions and roll induced loads on the design of FPSO system.
Further info: Non Linear Roll proposal
Contact: Flavia Rezende
Wind Load
Development of adequate guidelines for reproducibility of wind tunnel tests and CFD calculations
Further info: WindLoad JIP
Contact: Jos van Doorn or Jaap de Wilde
HITS
Hull Inspection Techniques & Strategy
Further info: HITS Leaflet HITS Proposal
Contact: Judy Burdett
SYROPE
Global Performance of Synthetic Rope Mooring systems
Further info: Syrope proposal
Contact: Erik Falkenberg
Chain FEARS
Finite Element Analysis of Residual Strength for severely corroded/worn chains
Further info: Background and Status
Contact: Gary Farrow
LCM (ABS)
Life Cycle Management Hull
Further info: –
Contact: Eeteng Khoo; +1 281 877 6872
SCORCH
Seawater Corrosion Of Rope & CHain (AMOG Consulting)
Further info: SCORCH Proposal, Flyer, Outline
Contact: Jeremy Rosen
SCORCH
Seawater Corrosion Of Rope & CHain (AMOG Consulting)
Further info: SCORCH Proposal, Flyer, Outline
Contact: Jeremy Rosen
SCORCH
Seawater Corrosion Of Rope & CHain (AMOG Consulting)
Further info: SCORCH Proposal, Flyer, Outline
Contact: Jeremy Rosen
DISCO
Hydrodynamics of Disconnectable Turret Systems
Further info: DISCO Proposal
Contact: Arjan Voogt or Olaf Waals
MonaRisa
Managing fatigue in steel catenary riser systems
Further info: MonaRisa proposal
Contact: Pieter Aalberts
Helios (MARIN)
Helicopter Operations for Offshore Ships
Further info: Helios Proposal
Contact: Henk van den Boom
COMFLOW-3 (MARIN)
Numerical modeling of non-linear fluid loads by means of Volume of Fluid Method
Further info: www.marin.nl
Contact: Tim Bunnik
Chain OPB fatigue (SBM)
Analysis of out of plane bending fatigue in mooring chain
Further info: www.fpsoforum.com (Archive; Rio Meeting)
Contact: Lucile Rampi
Mooring Integrity II (NDA)
Investigation in mooring failures
Further info: Noble Denton
Contact: Martin Brown
Offloading Operability II (MARIN)
Simulation of side-by side offloading
Further info: www.marin.nl
Contact: Arjan Voogt
On Board Wave and Motion Estimator (MARIN)
Prediction of floater motions 1 minute ahead
Further info: www.fpsoforum.com (Archive: Houston 2005 Meeting)
Contact: Henk van den Boom
HAWAI (MARIN)
Shallow water wave kinematics related to near-shore terminals
Further info: www.marin.nl
Contact: Bas Buchner
Structural Integrity II (ABS)
Investigation of structural integrity by inspections
Further info: www.fpsoforum.com (Archive: Houston 2005 Meeting)
Contact: Chris Serratella
FPSO Integrity JIP (MARIN)
Fatigue loads on FPSO’s
Further info: www.marin.nl
Contact: Henk van den Boom
FPSO Capacity (DNV)
Fatigue response of FPSO hull construction
Further info: DNV
Contact: Inge Lotsberg
DPJIP (MARIN)
Improvement of DP-control systems with wave feed forward
Further info: www.marin.nl
Contact: Albert Aalbers
FPSO Inspection JIP (ABS)
Structural integrity inspection data base
Further info: ABS
Contact: Chris Serratella
CALM Buoy (Principia)
Numerical analysis of calm-buoys behavior
Further info: Principia
Contact: Phillipe Le Buhan
FPSO Roll (MARIN)
Roll monitoring, prediction and control for FPSO’s
Further info: www.marin.nl
Contact: Henk van den Boom
Batelle Structural Stress (Batelle)
Fatigue analysis of steel structures
Further info: Batelle
Contact: Pingsha Dong
BreaKin JIP
Simulation of BreaKin JIP model tests with CFD
Further info: Leaflet
Contact: Jule Scharnke and Joop Helder
StrengthBond
The JIP StrengthBond Offshore aims to develop a robust strength prediction methodology of bonded steel and composite repairs for offshore unit’s hulls based on short-term and fatigue analysis.
Further info: Leaflet
Contact: Maxime Deydier
HAWA-III
The objective of the HAWA-III JIP is to extend and validate the overall design methodology of nearshore terminals based on model scale measurements and to provide practical tools and guidelines to apply the methodology.
Further info: Project Plan HAWAI-3 JIP
Link: Website
Contact: Frédérick Jaouën
HiTeAM
High-Tech Acoustic Monitoring – Acoustic Emission Condition Monitoring of Highly-loaded Low-speed Bearings
Project website: HiTeaM
Further info: Leaflet
Contact: Bart Scheeren
Discover Our Vision
We Make Life Easier With Smart, Effective Solutions
Our smart and effective solutions simplify everyday life for our customers, offering convenience and efficiency in every interaction. We are dedicated to delivering innovations that make a real difference, enhancing the overall customer experience and satisfaction.
